FINA Stoneworks offers a unique architectural cladding system with a variety of materials and finishes to choose from. Our architectural panel systems are used for the cladding of exterior and interior walls, column covers, elevator cabs, storefronts, yachts, aircrafts, motorhomes and more.
Made in the USA
FINA Stoneworks panels are manufactures right here in the USA. We responsibly source raw materials used in the making of our panels. Production is done on-site at our factory in Wilmington, Massachusetts. A domestic supplier offers our clients ease of access to our team members, reduced lead-times, saves costs, promotes job growth and material may qualify for LEED credits on your project.
FINA Stone Panel
FINA Stoneworks specializes in manufacturing natural stone into a complete, lightweight stone panel system for interior and exterior cladding. These panels weigh only 3.5 pounds per square foot – about 80% lighter than 1” thick dimensional stone slabs and provide greater flexural strength and higher impact resistance. Because we use authentic natural stone, you can choose from almost any stone type available. The reduced weight offers significant cost savings to the structural backup required for receiving thick, heavy slabs and the equipment needed to install them. Installation speeds are dramatically increased over traditionally set stonework providing additional savings and quicker “Time to Market”. Standard panel sizes of 4’x8’ and 5’x10’ are possible depending on the slab sizes available. Panels are cut to size per your project needs.
FINA Quartz Panel
The new engineered quartz material is actually created through a manufacturing process that mixes about 95 percent ground natural quartz with 5 percent polymer resins. More durable and long-lasting than most granite, quartz is one of the hardest materials in the world. FINA processes quartz slabs in much the same way we process dimensional stone for our stone panel series, saving weight while providing greater flexural strength and offering greater impact resistance. Quartz panels are typically used for interior walls, columns, entryways, accent walls, lobbies and elevator cab interiors. Panel sizes of 3’x9’ and up to 5’x10’ are available. Panels are cut to size per your project needs.
FINA Porcelain Panel
There has been a shift in the way the A&D community is able to use porcelain tile. Large sheets of thin porcelain tile, coined (TPT), is characterized by its minimal thickness of anywhere between 3 to 6 mm and larger dimensions of up to 5 x 10 feet in length and width. These large tiles are brittle and can be difficult to handle without cracking or breakage. FINA has developed a process for bonding our structural honeycomb to the TPT, providing greater flexural strength and is about 60-times more impact resistant. These porcelain panels can be used for interior and exterior. Panel sizes of 3’x9’ and up to 5’x10’ are available. Panels are cut to size per your project needs.
FINA has aligned itself with a select group of suppliers that share our values for providing customers with the highest quality products and services. Our suppliers offer traditional, as well as the newest materials desired for architectural cladding panels.
FINA panels and panel systems are rigorously tested to insure long lasting, worry free performance. Our Quality Control (QC) procedure is done “In-Process” and documented throughout each step of manufacturing and crating. We are here to assist, so please contact one of our technical experts to discuss your application and find the best options for it.
FINA Stone Panels have been tested to meet US building code requirements for exterior and interior use.